Sprinkler Sprayers & Rotors
Customize and add your own sprinkler heads
Choose 3 sprinkler heads using the list below. Then add a Custom Kit for every 3 heads you order. You can also add your own 1/2" sprinkler heads if desired.  Since each head type has a different pressure/flow specs. you'll want to make sure to keep each zone or kit dedicated to the same type heads. For example, avoid mixing Rotors and Sprayers in the same kit. Try to keep rectangular sprays separate if possible as well. Extend your kit if needed with extra conduit. Finally check your GPM and PSI to make sure you can power 3 heads at a time. Our rotor heads accommodate lower GPMs with interchangeable nozzles we provide with each sprinkler head, otherwise most of our sprayers are rated at 2 GPM at 30 PSI minimum required.
Full Sprinkler U Fitting w/ Autodrain & 2 Collar Kits (required when adding heads into Lawn Belt zone).
|
End Sprinkler Fitting w/ Autodrain & 1 Collar Kit (required for last head at end of Lawn Belt zone).
|
Adjustable 40-360 degrees Rotor Popup 15 to 25 ft. of radius. (replacement head for existing Saturn III Orbit)
|
adjustable 25-360 degrees popup 15 feet dia spray distance - combine this with Custom Kit
|
|
|
|
|
2 In. Pop-up; 3' x 12' End Strip Pattern - combine this with Custom Kit
|
2 In. Pop-up; 4' x 20' Center Strip Pattern - combine this with Custom Kit
|
2 In. Pop-up; 5' x 24' Side Strip Pattern - combine this with Custom Kit
|
Adjustable 0-360 degrees popup 15 feet radius spray distance - combine this with the Custom Kit (2 Head System)
|
Saturn III nozzles - Pk of 4
|
|
Need help? Click here or...
Call 877-LAWNBELT
(529-6235)
"When I found LawnBelt I could get the best of both worlds, a invisible, fully automatic, highly customized multiple zone install using irrigation valves without the hassles of renting all of that equipment, permits, trenching...ect."
George - Chicago, IL
|
|